Umarex ReadyAir Gen 2 High Pressure Paintball & PCP Compressor
Delivery and Shipping
Delivery and Shipping
Most orders ship within 24 hours. Free shipping available on orders over $59 to the continental United States. (Alaska, hawaii, and Puerto Rico not included) (Paintballs and certain rounds not included)
The Umarex ReadyAir Gen 2 is a portable high-pressure compressor built to cover both sides of the air gun world — paintball markers and PCP air rifles and pistols — in one unit. Paintball tanks aren't all the same fill pressure, and PCP guns each have their own spec, so instead of locking to one number, the ReadyAir Gen 2 lets you dial in any cut-off pressure up to 4,500 PSI on its digital display. Connect the fill hose, set the number your tank calls for, and it shuts off on its own the moment it gets there.
Adjustable Fill Pressure, Up to 4,500 PSI
Paintball tanks come in two ratings — some run 3,000 PSI, others run 4,500 PSI — and PCP air rifles and pistols each have their own fill spec too. Rather than building around one fixed pressure, the ReadyAir Gen 2 lets you set the exact cut-off your tank needs, anywhere up to 4,500 PSI. That covers a 3,000 PSI paintball tank, a 4,500 PSI paintball tank, and a PCP bottle set to whatever its specific fill pressure is — all from the same compressor, no separate pumps for separate gear.
Programmable Digital Cut-Off Pressure
The upgraded digital display lets you set an exact cut-off pressure before you start filling — 3,000 PSI, 4,500 PSI, or anything in between for a PCP tank rated somewhere in that range. The compressor stops on its own the instant it gets there, so every fill is consistent and there's no standing over the unit watching a gauge. The display also tracks total runtime and unit temperature.
Fast Fills at Home or in the Field
The ReadyAir Gen 2 fills a 24 cubic inch tank from empty to 4,500 PSI in about 18–20 minutes, with smaller tanks and partial refills finishing even faster. It runs on either a standard 110V AC wall outlet at home or on the range, or a 12V DC connection straight to a vehicle battery when you're out in the field — so it keeps up wherever you're shooting. The integrated dryer on the fill hose keeps moisture out of the air going into your tank and your marker or airgun.
Built for Reliability
The oil-free design means there's no oil to change or top off, and automatic heat protection shuts the unit down if it starts running too hot so you're not left guessing. Compared to the original ReadyAir, this Gen 2 model is 30% smaller, over 15% lighter, and 40% quieter — easier to carry, store, and run without drawing attention — and the straightforward internal construction keeps long-term repairs simple if service is ever needed.
Umarex ReadyAir Gen 2 Compressor Specs
| Max Fill Pressure | 4,500 PSI |
| Compatible Tanks | Paintball tanks (3,000 or 4,500 PSI) & PCP tanks at any pressure up to 4,500 PSI |
| Cut-Off Control | Programmable digital display with auto shut-off |
| Fill Time (24ci tank, 0–4,500 PSI) | Approx. 18–20 minutes |
| Power Source | 110V AC or 12V DC |
| Compressor Type | Oil-free |
| Overheat Protection | Automatic electronic heat protection, auto power-off |
| Fill Hose | High-pressure hose with integrated moisture dryer |
| Weight | 21.3 lbs (over 15% lighter than Gen 1) |
| Size | 30% smaller than Gen 1 ReadyAir |
| Noise Level | 40% quieter than Gen 1 ReadyAir |
| Included | Compressor, 110V AC cable, 12V DC cable, fill hose |
Umarex ReadyAir Gen 2 FAQs
Yes. Paintball tanks run at either 3,000 PSI or 4,500 PSI depending on the tank, and PCP air rifles and pistols each have their own fill pressure. Set the digital display to whatever number your tank calls for — up to 4,500 PSI — and the compressor stops there automatically.
Filling a 24 cubic inch tank from empty to 4,500 PSI takes about 18–20 minutes. Smaller tanks and partial refills take less time.
No. It's an oil-free design, so there's no oil to change or top off. Internal construction is straightforward, so if service is ever needed down the road, repairs are simple.
Yes. It accepts either a standard 110V AC household outlet or a 12V DC connection to a vehicle battery, so it works at home, on the field, or out in the field hunting.
Each unit ships with the compressor, a 110V AC power cable, a 12V DC power cable, and a high-pressure fill hose with a built-in moisture dryer and quick-disconnect fitting.
The ReadyAir Gen 2 has automatic heat protection that powers the unit down if it starts running too hot, protecting the internal components during extended use.
The Gen 2 is 30% smaller, over 15% lighter, and 40% quieter than the original ReadyAir, with an upgraded digital display and improved heat protection built in.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.